How to record a kick drum - Supreme {PR} Organic SoundCloud Promotion | Supreme {PR} Organic SoundCloud Promotion
loader image
0 Items

By Disc Makers’ Author Jon Marc Weiss and Andre Calilhanna

Producer/engineer/studio owner Jon Marc Weiss discusses microphones and miking techniques when recording a kick drum in your studio.

When recording a kick drum, I’ve seen people stuff all sorts of things in there to try to control the ringing. What are your recommendations for what to use and how much?

The first thing I do when recording kick drum is have a drummer take everything out of the drum and listen to what’s going on. You need to make sure that the beater head is evenly tuned, to start with. You’ll get some strange ill effects if you’ve got one side tuned higher than the other. You kinda get this “ba-uum” sound with an additional tail to the hit.

For muffling, I’ve used sandbags, really thin ones, like the ones you might find for physical therapy or something – those things filled with sand are awesome inside a kick drum. A pillow or dense foam can work as well, but they tend to absorb some of the high-frequency energy, so keep that in mind.

But I’ve worked with drummers who won’t take their front head off and refuse to cut a hole in it, and I’ve had to work with that. In some cases, they got the tuning to sound pretty amazing, so it worked out pretty well. I wound up putting a mic on either side of the bass drum, with the front mic out of phase, and the end result was actually pretty good.

The biggest issue with having the mic outside the drum is the bleed. Bleed from the cymbals and from the other drums, which can be a real problem for the kick, because it’s driving the entire song and a lot of times, when you’re mixing, you want to gate your kick and snare. I wasn’t able to gate the kick and had to work with more of an open sound, which isn’t always a bad thing.

So you used the overheads and a mic on the front (non-beater) head?

Yes, and with good results too! It really depends on what you’re trying to capture, as well your budget. I’ve heard some decent home recordings where there was a mic in the kick or in front of the kick and a pair of mics overhead and it can work really well, depending on the room you’re in.

Ideally, how many mics are you using on a kick drum?

Two is pretty typical. I usually start with a mic in the middle of the drum pointed at the beater at a 45º angle. You don’t really want to put the mic right behind the beater, facing it straight on, because you can pretty easily over-extend the diaphragm and distort the transformer, as well as produce other unwanted effects.

The next thing I do is make a teepee. You take a boom mic stand at a 90º angle, and you place the arm of the boom on top of the kick drum – making sure there’s foam or something between the stand and the drum so you don’t scratch the drum up. Then take a heavy blanket, like a moving blanket, something really dense, and you make a tent out of it. At the end of the tent, I put a shotgun microphone (like the Sennheiser 416), and that’s where I get the extended low end. You can use any mic, really, but I prefer the sound of the shotgun.

Sometimes I might add a third mic on the beater side, in front of the beater, to pick up the beater sound. Those three together are pretty amazing, because there are lots of situations where you might want to hear the heavy beater sound and even pick up the pedal noise as well. Like Paul McCartney’s, “Dance Tonight,” where the whole thing is driven by the kick drum… it just sounds a little more natural, like you’re in the room. It’s certainly not right for every situation.

What are your go-to mics?

record a kick drum Sennheiser 421record a kick drum EV RE20record a kick drum AKG D112There are so many great mics, and so many mic techniques you can use, but the first one I’m typically going to go to is the AKG D112. If I’m going for a darker tone I’ll grab my vintage AKG D12E or an Electro-voice RE20. Another mic I like to use is the Sennheiser 421 – there are three generations of these and each one provides a slightly different tone.

I’ve mic’d my kick drum where, rather than having the mic all the way inside the drum, it’s just crossing the threshold of the head – the front end of the mic is just peeking into the drum.

I have a couple of issues with that, especially if the hole is close to the same size as the mic. First, the air is going to constantly be hitting the mic. Now you probably have a pop filter on there, but that can ultimately produce some very ill effects. All the air is moving in and out of that hole, and that air is going to move the diaphragm unnecessarily. There’s air moving even after you hit that drum. You’re making the diaphragm move when it doesn’t have to.

Maybe for live that could work, but for the studio, I’m always working somewhere in the middle of the drum. Sometimes I’m no more than 2″ from where the beater is smacking the head, and that’s going to give me a real tappy sound. As I pull the mic further from the head, it’s going to take away some of that articulation and give me a more boomy sound. You really can change the sound quite a bit by altering the angle and pulling the mic either in or out.

Do you have a preference for the material the beater is made out of?

FalamSlamIt depends on the style of music. I’ve had situations where I’ve changed out the beater, from a felt beater to a wood or a plastic beater to get a little more attack. I’ve also taped a coin, a quarter or a dime, onto the head on the beater side, to get this tappy, heavy metal, Megadeath “click” to the bass drum sound. You can buy these pads from Remo (Falam Slam) that do the same thing. It’s not a sound everyone loves, but it can work well in songs that have a lot of heavy guitar tracks.

Any other tricks up your sleeve?

record a kick drum Moon MicOne trick that can be used alternatively to the teepee setup is to use a woofer speaker as a microphone. Sounds crazy, but it can work really well to get some air moving! I’ve mostly seen engineers use old Yamaha NS10 woofers, but you can use anything you have around the house as long as it isn’t too large or too small. A 5” to 8” speaker will work best. You can make one by cutting off the end of a guitar cable and connecting the bare wire to the positive and negative terminals of the speaker. Then you take the 1/4″ plug end of the cable, connect it to a direct box, and connect to your mic input. Be careful when you bring up the channel on your system because a lot of low end will be coming in and you don’t want to blow up your monitors. DW is manufacturing the Moon Mic, which is based on this same idea.

Jon Marc Weiss is the Director of IT Operations for Disc Makers and also an accomplished recording engineer, studio designer, and musician with 30 years’ of industry experience. He owns and operates a private studio called Kiva Productions right outside of Philadelphia in Jenkintown, PA, where he records and produces his own music along with local and national acts. Check out Kiva Productions on Facebook.

Build your own home recording studio

Related Posts
How to record a snare drum
How to record better tones in your home studio
How to get better results mixing in your home studio
Getting a great vocal take in the studio
Psychology and the music producer

This Disc Makers post How to record a kick drum appeared first and was stolen from OUR Blog Disc Makers Blog.

SoundCloud Promotion

Supreme{PR} is a Texas based Organic SoundCloud Promotion Agency with a focus on music promotion streaming platforms like Soundcloud and Spotify. We generate real engagement through our partnerships with the largest promotion networks. Supreme{PR} provides 100% transparent services and remarkable customer service. Disclaimer: We offer organic exposure, not miracles. Make sure your songs are professionally produced and mastered.


Shopping Cart
There are no products in the cart!
USD $0.00
USD $0.00
Continue Shopping